How to Remove a Floating Floor: A Simple Step-by-Step Guide
Removing a floating floor may seem like a daunting task, but with the right approach, it's a manageable DIY project. Whether you're planning to replace your flooring or need to expose the subfloor for repairs, this guide will walk you through each step to ensure a smooth removal process.
Let’s dive in!
What You’ll Need:
- Utility knife
- Pry bar
- Hammer
- Rubber mallet (optional, but helpful)
- Protective gloves (because, you know, safety first)
- Vacuum or broom for cleanup
Step 1: Clear the Space
First things first, you’ll need a clear workspace. Move out all the furniture, rugs, and anything else that’s sitting on your floor. The last thing you want is to trip over your couch while you’re mid-project. And, of course, having an open space makes the job easier.
Step 2: Remove the Skirting Boards
Next up, grab your pry bar and carefully pop off the skirting boards around the room. You don’t want to damage these if you plan on reusing them, so go easy here. If they’re being stubborn, a rubber mallet can give you a bit of extra leverage.
Step 3: Find the First Board
Now, here’s where it starts to get fun. You need to find your entry point. Most floating floors have a section where the boards end at a door or along a wall. Use your pry bar to gently lift up that first board. This one might take a bit of elbow grease, but once it's up, the rest will follow more smoothly.
Step 4: Start Lifting the Boards
With that first piece out, you can start removing the others. It’s a bit like peeling an onion – just one layer at a time. Gently lift each board, making sure you’re pulling them up without too much force and slide them out of the groove. If you’re lucky, the boards will come right out. If not, use your hammer or mallet to tap the ends for some extra persuasion.
Step 5: Handle the Underlay
Once all the boards are gone, you’ll see the underlay. This foam or plastic layer can be easily peeled up. Just grab it at the edges and roll it away.
Step 6: Tidy Up
Congratulations, the hard part is over! Now it’s time to tidy up. Sweep or vacuum the area to get rid of any dust or leftover bits.Â
Step 7: Dispose of the Old Flooring
The final step is getting rid of the old materials. If the boards are in good shape, consider recycling them or donating them. If they’re beyond saving, just chuck them in a skip bin or arrange for proper disposal.
And there you have it!
Removing a floating floor is a straightforward job once you get the hang of it. A little bit of time, some basic tools, and you’re good to go. Ready to refresh your space with new flooring? You’ve already done the hard part—now it’s just time to install something new and stylish.
Got more questions or need help choosing your new floors? Contact our experienced team today to discuss a flooring solution for your home.
By James Embelton